EN 10021-1993
|
ID： |
3DA950D15DDE40D4852D9C6F9EF2E5D6 |
|
文件大小(MB)： |
0.76 |
|
页数： |
18 |
|
文件格式： |
|
|
日期： |
2008-1-5 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
UDC 669.14:620.1,DEUTSCHE NORM,December 1993,General technical delivery conditions for steel and iron products English version of DIN EN 10021,DIN,EN 10021,Allgemeine technische Lieferbedingungen fur Stahl und Stahlerzeugnisse,Supersedes DIN 17010, June 1985 edition.,European Standard EN 10021:1993 has the status of a DIN Standard.,N_d sep zcEs*」e5-6un6s:ra-@AJe>,X H - o > -p Xuequ9?a U9-S0P」9P sne >lon」psn4,■e-rom 6unsoN」s-n---s￡"①c0an ① Q NsJo uo-ss-E-od-0-d°q—InolltM psonpo.ld0National foreword,This standard has been prepared by ECISS/TC9.,The responsible German body involved in its preparation was the NormenausschuB Eisen und Stahl (Steel and Iron Standards Committee).,The present standard, which largely agrees with the content of ISO 404, supersedes DIN 17010 and EURONORM 21.,The DIN Standards corresponding to the International Standards referred to in clause 2 of the EN are as follows:,International Standard DIN Standard,ISO31-0 DIN 1313,ISO 3954 DIN ISO 3954,ISO 4489 DIN ISO 4489,ISO 4990 DIN 1690 Part 2,Standards referred to,(and not included in Normative references),DIN 1313,DIN 1690 Part 2,DIN ISO 3954,DIN ISO 4489,Physical quantities and equations; concepts and nomenclature,Technical delivery conditions for castings of metallic materials; steel castings; classification into severity levels on the basis of non-destructive testing,Powders for powder metallurgy; sampling,Sintered hard metal; sampling and testing,Previous editions,DIN 17010: 08.81, 01.84, 06.85.,Amendments,In comparison with the June 1985 edition of DIN 17010, the following amendments have been made.,a),For ordering purposes, it may be agreed to use of one of the quality systems specified in EN 29 001, EN 29002 or EN 29 003 (which are equivalent to DIN ISO 9001, DIN ISO 9002 and DIN ISO 9003, respectively).,b),Specifications are now made for supply by a processor or an intermediary (cf. clause 6).,c),It is now permitted to test a unit comprised of products from the same casting sequence, which better accounts for products made by sequence casting (cf. subclause 8.3.2.1).,d),More requirements are now specified for marking (cf. clause 10).,e),Clause 11 no longer contains reference to German regulations.,International Patent Classification,G 01 B,G 01 D,G 01 N 033/20,EN comprises 17 pages.,Beuth Verlag GmbH, Berlin, has the exclusive right of sale for German Standards (DIN-Normen). 05.94,DIN EN 10021 Engl. Price group 9,Sales No. 1109,EUROPEAN STANDARD NORME EUROPEENNE EURORAISCHE NORM,EN 10021,September 1993,UDO 669.14:620.1,Descriptors: Iron and steel products, steels, delivery, inspection, tests, specifications.,English version,General technical delivery requirements for steel and iron products,Aciers et produits siderurgiques; condi- Allgemeine technische Lieferbedingungen tions generales techniques de livraison fur Stahl und Stahlerzeugnisse,N_a sop zce_q>l-e5主 6un6A_:ra上9 一 AJ9>,X H - o > BE1」xuequslea U9-B 七6-p」9P sne *on-psn4,This European Standard was approved by CEN on 1993-09-24.,CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.,Up-to-date lists and bibliographic references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.,This European Standard exists in three official versions (English, French, German), A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.,CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.,CEN,European Committee for Standardization Comite Europeen de Normalisation Europaisches Komitee fur Normung,Central Secretariat: rue de Stassart 36, B-1050 Brussels,. 1993. Copyright reserved to all CEN members.,Ref. No. EN 10021 :1993 E,Page 2,EN 10021:1993,Contents list,Page,Foreword ..2,1 Scope . 3,2 Normative references .3,3 Definitions .4,4 Information to be supplied by the purchaser.5,5 Manufacturing process ..6,6 Supply by a processor or intermediary ..6,7 Requirements ..7,8 Inspection and testing.8,9 Sorting and processing12,10 Marking ..12,11 Disputes.12,Annex A Bibliography (informative) 16,Annex B Important standards for testing and analysis of iron and steel (informative) 17,N_a sop zce_q>l-e5主 6un6A_:ra上9 一 AJ9>,X H - o > BE1」xuequslea U9-B 七6-p」9P sne……
……